Ford 2010 escape hybrid Manual De Usuario
Replacing license plate lamp bulbs
1. Make sure the headlamp switch is
in the off position.
in the off position.
2. Depress the lever and carefully
pry the license plate lamp assembly
(located above the license plate)
from the liftgate.
pry the license plate lamp assembly
(located above the license plate)
from the liftgate.
3. Rotate the bulb socket
counterclockwise and remove from
lamp assembly.
counterclockwise and remove from
lamp assembly.
4. Pull bulb straight out of socket
and push in the new bulb.
and push in the new bulb.
5. Install the bulb socket into the
lamp assembly and rotate clockwise.
lamp assembly and rotate clockwise.
6. To install, carefully press the
lamp assembly into liftgate.
lamp assembly into liftgate.
Replacing high-mount brake lamp bulbs
To remove the lamp assembly:
1. Remove the two screws and move
the lamp assembly away from the
liftgate.
the lamp assembly away from the
liftgate.
2. Remove the bulb holder from the
lamp assembly by depressing the
snaps.
lamp assembly by depressing the
snaps.
Lights
67
2010 Escape Hybrid (ehv)
Owners Guide, 1st Printing
USA (fus)
Owners Guide, 1st Printing
USA (fus)