Fujitsu plasmavision pds5001u Manual De Usuario

1 RGB 2 input terminal (RGB 2 INPUT/mD-sub)

Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.

2 RGB 1 input terminal (RGB 1 INPUT/DVI-D)

Connect this terminal to the PC’s display (digital RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.

*The connection cable No.88741-8000 made by 

 is recommanded.

3 RS-232C terminal (RS-232C)

This terminal is provided for you to control the display from the PC.  Connect it to the RS-232C terminal on the PC.

When connecting a cable, attach a ferrite core to the cable.  (See P. E-12.)

4 RGB 3 synchronization switch (SYNC SW  TTL/ANALOG (75 

Ω

This switch is used to terminate horizontal (H)  terminal and vertical (V)  terminal, out of RGB3 input terminals,  with 75 

Ω

.

 TTL

: Used when sending RGB signals from the PC to the RGB 3 terminal

 ANALOG (75 

Ω

): Used when sending analog synchronization signals to the RGB 3 terminal

5+6 RGB 3 input terminal (RGB 3 INPUT/BNC)

Connect this terminal to the PC's display (analog RGB)output terminal or decoder (digital broadcast tuner,etc.) output terminal.

*When RGB3 input terminal is connected, Comp.video mode is not available.

6 Component video input terminal (COMPONENT VIDEO INPUT)

Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.

*When Comp.video input terminal is connected, RGB3 mode is not available.

7 Video input terminal (VIDEO INPUT)

Connect this terminal to the video output terminal of your VCR or video disk player.

8 S-video input terminal (S-VIDEO INPUT)

Connect this terminal to the S-video output terminal of your VCR or video disk player.

9 Power input terminal

Connect this terminal to the power cable supplied with the display.

When connecting a cable,attach a ferrite core to the cable. (See P. E-12)

0 OFF/STD-BY   switch

 OFF

:The power indicator lamp goes off, and the power can’t be turned on by the power button. The power is partly supplied.

 STD-BY  :The power indicator lamp lights red, and the power can be turned on or off by the power button.