Furuno navnet gd-1920c Manual De Usuario

Descargar
Página de 239
3. PLOTTER OPERATION 
 3-8 
 
3.2 Presentation 
Mode 
Three types of presentation modes are provided for the plotter display: north-up, course-up 
and auto course-up. To change the presentation mode, press the 
HIDE/SHOW key followed 
by the MODE soft key. Each press of the key changes the presentation mode and 
presentation mode indication (top right-hand corner of the screen) cyclically in the sequence 
of North-up, Course-up and Auto course-up. 
For C-map model, the sequence is North-up, Perspective, Course-up and Auto course-up 
when PERSPECTIVE DISPLAY is set to ON, on the CHART DETAILS menu. (See Chapter 
7.) 
 
North-up 
North (zero degree) is at the top of the display and own ship is shown with a filled circle. 
This mode is useful for long-range navigation. 
 
Course-up 
The course-up mode is useful for monitoring 
ship’s progress towards a waypoint. The 
destination is at the top of the screen when a 
destination is set. When no destination is set, 
the course or heading is at the top of the screen 
at the moment the course-up mode is selected. 
A filled triangle marks own ship’s position. 
 
Note: The data sentences GGA and VTG must 
be output from the NavNet display unit 
connected to the GPS navigator in order to 
correctly orient the own ship marker in the 
course-up mode on other NavNet display units. 
 
Auto course-up 
The course is at the top of screen at the moment 
the auto course-up mode is selected. In this 
mode, the current course is kept at the top of the 
screen when the change is within 22.5 degrees. 
For example, if your vessel turns larger than 
22.5 degrees to port or starboard, the chart 
display will rotate so that your course is pointing 
towards the top of the screen again. A filled 
triangle marks own ship’s position. 
 
 
 
Perspective (C-map only) 
Chart data is projected in perspective mode, for 3D 
simulation, during navigation.
 
MARK
  ENTRY
BRIDGE
FISH
WP-002
MODE
NTH UP
NAV
    POS
  
34° 22. 3456’N    359.9°
M
    
TRIP
  NU
080° 22. 3456’E    19.9 kt       99.9 nm
  16.0nm
D.BOX
ON/
OFF
 
North-up 
  34
°
 22. 3456'N    272.4
°
M
    
TRIP
  CU
080
°
 22. 3456'E    15.9 nm      99.9 nm
+
MARK
  ENTRY
MODE
CSE UP
GO TO
CURSOR
CENTER
WPT 001
  16.0nm
D.BOX
 
ON
/OFF
 
Course-up 
MARK
  ENTRY
MODE
AT CU
GO TO
CURSOR
CENTER
  34
°
 22. 3456'N    272.4
°
M
   
TRIP
   CU
080
°
 22. 3456'E    15.9 nm     99.9 nm
+
  16.0nm
D. BOX
 ON/ 
OFF
 
Auto course-up