Fujitsu fi-4860C2 Manual De Usuario
3-7
3.2 Cleaning the Pad
3
DA
IL
IL
Y
C
A
A
R
E
4.
Wipe the translucent rubber part of the Pad ASSY using a lint free cloth
moistened with cleaner F1.
moistened with cleaner F1.
5.
Install the guide plate in the reverse order of the removal.You should push
it down then rotate back, so the installation can be done smoothly.
it down then rotate back, so the installation can be done smoothly.
6.
Lower the ADF upper sheet guide carefully.
7.
Lift the Upper transport unit to release the safety lock, then lower the unit
carefully and push the unit to close it completely.
carefully and push the unit to close it completely.
ATTENTION
It may take long before the cleaner vaporizes if a large quantity is used.
When cleaning the scanner parts, dampen a cloth with modest quantities of
the cleaner. In addition, wipe off the cleaner completely with a soft lint-free
cloth to leave no residue on the surface of the cleaned parts.
When cleaning the scanner parts, dampen a cloth with modest quantities of
the cleaner. In addition, wipe off the cleaner completely with a soft lint-free
cloth to leave no residue on the surface of the cleaned parts.
Pad (cleaning area)
Pad ASSY
Guide plate