Furuno 1942 Manual De Usuario

¡ range, bearing and time-to-go to both

waypoint selected on the navigator and the
cursor

¡ speed.

(If the navigation input includes destination
data, waypoint position is denoted on the ra-
dar display by a dashed ring.)

1. Press the [MENU] key.

2. Select the “DISP DATA”.

3. Press the [ACQ/ENTER] key.

4. Press the [ACQ/ENTER] key to select the

message for Navigation display.

5. Prss the [ACQ/ENTER] key to set.

6. Press the [MENU] key to close the menu.

“WATCHMAN” appears at the top of the
screen, the radar transmits for one minute to
check for targets inside the guard zone, and
then the CRT shuts off and the radar goes into
stand-by.

Go into the “OTHERS” menu, and set “15.
Watchman” for off.

Note 1: Watchman can be used without a
guard zone.

Note 2: The alarm sounds just before the ra-
dar starts and stops transmitting.

Navigation data can be displayed at the screen
bottom if this radar receives navigation input
in IEC 1162 format. Navigation data include

¡ position in latitude and longitude or Lo-

ran-C time difference

HDG   234.5°

SP
HU

. 125

NM

.

 

0625

 TRAIL 

30M         

ZOOM

ES1

AUTO

25:38

  G (OUT)

VRM

0.048NM
0.100NM

13.5  R

°

0.142NM

A/C
AUTO
EBL
345.6  R

23.0  R

°
°

Waypoint Mark

Navigation
Data

 OWN SHIP
  34° 56. 12N
135° 34. 56E
SPD 35.0KT

WAYPOINT
  0.09 NM
  50.0°M
TTG 00:20

1.5 NM           0.06

 +   CURSOR
   34° 29. 98N
 136° 35. 77E
TTG 01:00