Hobart FT900SBD Manual De Usuario

– 20 –

before performing any maintenance procedure. 

Line strainers used in water or steam lines should be cleaned one week after machine installation and 

periodically thereafter.  

A list of acceptable lubricants, as well as the lubricants themselves, are available from your local Hobart 

Service Office. 

All motors have sealed bearings and require no lubrication maintenance.

Check the oil level in the conveyor gearmotor at the unload end of the machine every six months by 

removing the gear case fill-plug (Fig. 36). The oil level should be at the bottom of the fill-plug hole. 

Draining the gear case can be achieved by removing the Drain plug (Fig. 36) and capturing and  

recycling the drained oil.  After rescrewing the Drain plug back in the hole, use only Mobilgear # 630 

to replenish or replace the oil.  

GEAR CASE

FILL PLUG

DRAIN PLUG