Brother hl-1670n network user Manual De Usuario
CHAPTER 1 UNIX PRINTING
1-8
IBM RS/6000 AIX Configuration
The RS/6000 AIX operating system uses the smit program to set up the remote
printer. The procedure is as follows for AIX 4.0 and later:
printer. The procedure is as follows for AIX 4.0 and later:
1.
Enter smit and select "devices"
2.
Select "Printer/Plotter"
3.
Select "Print Spooling"
4.
Select "Add a Print Queue"
5.
Select "Remote"
6.
Enter the following Remote Printer Settings:
Name of queue (user selectable)
Host name of Remote Printer (print server name; must match name in
/etc/hosts file or use the print server IP address)
Name of queue on remote printer (print server binary or text service name,
eg. BINARY_P1 or TEXT_P1).
Type of print spooler. BSD (press the LIST button and choose BSD)
Host name of Remote Printer (print server name; must match name in
/etc/hosts file or use the print server IP address)
Name of queue on remote printer (print server binary or text service name,
eg. BINARY_P1 or TEXT_P1).
Type of print spooler. BSD (press the LIST button and choose BSD)
The procedure for pre-V4.0 systems is as follows.
1.
Enter smit and select "devices"
2.
Select "printer/plotter"
3.
Select "manage remote printer subsystem"
4.
Select "client services"
5.
Select "remote printer queues"
6.
Select "add a remote queue"
7.
Enter the following remote queue settings:
8.
Name of queue to add (user selectable)
9.
Activate the queue (Yes)
10.
Destination host (print server name; must match name in /etc/hosts file or
use the print server IP address)
use the print server IP address)
11.
Name of queue on remote printer (print server binary or text service name,
eg. BINARY_P1 or TEXT_P1).
eg. BINARY_P1 or TEXT_P1).
12.
Name of device to add (user selectable; for example lp0)