Garmin GPSMAP 60Cx Manual De Usuario

G

ETTING

 S

TARTED

 > 

The GPSMAP 60Cx operates on two AA batteries 

(not included), which are located in the back of the 

unit. You can use Alkaline or NiMH batteries. See 

page 56 for information on setting the battery type.

1.  Remove the battery cover 

by turning the D-Ring 1/4 

turn counter-clockwise and 

pulling the cover loose.

2.  Insert the batteries, 

observing the proper 

polarity. A polarity diagram 

is molded into the battery 

compartment. 

3.  Reinstall the battery cover 

by aligning the back cover 

with the unit and turning the 

D-Ring 1/4 turn clockwise.

Remove the batteries from your GPSMAP 60Cx when 

you do not expect to use the unit for several months. 

Stored data is not lost when batteries are removed.

1.  Place the loop of the Lanyard through the slot 

at the at the upper left side on the back of the 

unit.

2  Route the strap through the loop and pull tight.

Refer to page 9 for information on accessing the 

MicroSD data card in the battery compartment.

USE BY

 2009

USE BY

 2009

Battery 

Compartment

Wrist Strap 

Installation