Furuno 1933C Manual De Usuario
3-1
3. PLOTTER
OPERATION
3.1 Plotter
Displays
You may show the plotter display over the entire screen, in the overlay screen
with the radar display, or in a combination screen.
with the radar display, or in a combination screen.
3.1.1
Full-screen plotter display
34
°
22. 3456'N 359.9
°
M
TRIP
NU
080
°
22. 3456'E 19.9 kt 99.9 nm
BRIDGE
FISH
002WPT
MARK
ENTRY
ENTRY
MODE
NTH UP
NAV
POS
D. BOX
ON/
OFF
Nav data window
(Data changes with NAV soft
key setting and cursor
status. For details see next page.)
(Data changes with NAV soft
key setting and cursor
status. For details see next page.)
Course bar
Soft keys
Track
Own ship
marker
marker
Icon (from left)
North Marker
Chart
Alarm
Track Hold
Chart Offset
Save
L/L Offset
Battery
(See icon
table on
page A-12
for details.)
North Marker
Chart
Alarm
Track Hold
Chart Offset
Save
L/L Offset
Battery
(See icon
table on
page A-12
for details.)
Waypoint name
Waypoint marker
Scale
16.0nm
S
I
M
Full-screen plotter display
Note:
The own ship marker blinks when the FURUNO GPS Receiver GP-310B
loses the GPS signal. For the NavNet display units receiving the GPS
signal, the message “No GPS fix!” appears approx. one minute after the
signal is lost and is accompanied by the audio alarm. For the NavNet
display unit connected to the GP-310B, the visual alarm is released soon
after loss and the audio alarm sounds five minutes later.
signal, the message “No GPS fix!” appears approx. one minute after the
signal is lost and is accompanied by the audio alarm. For the NavNet
display unit connected to the GP-310B, the visual alarm is released soon
after loss and the audio alarm sounds five minutes later.