Furuno FR-2125V Manual De Usuario
6-8
2. Press the [8] key to select smoothing factor.
3. Press the [ENTER] key.
6.5.6
Erasing track
In the busy traffic, the screen may become cluttered. You can remove all or a percentage
of own ship track from the memory to clear the display. Track of other ships can also be
cleared.
of own ship track from the memory to clear the display. Track of other ships can also be
cleared.
1. Press the [NAV MENU] key.
2. Press the [9] key to display the PLOTTER ERASE menu.
[PLOTTER ERASE]
1 [VIDEO PLOTTER 1]
2 OWN SHIP PLOT 30%/50%/80%/ALL
3 TARGET PLOT
1 [VIDEO PLOTTER 1]
2 OWN SHIP PLOT 30%/50%/80%/ALL
3 TARGET PLOT
30%/50%/80%/ALL
4 MARK
OFF/ALL
5 WPT
OFF/ALL
6 NAV LINE
OFF/ALL
Figure 6-9 PLOTTER ERASE menu
3. Press the [2] key several times to select OWN SHIP PLOT and the amount of track
points you wish to erase.
4. Press the [ENTER] key.
5. To erase other ship’s track, press the [3] key to select TARGET PLOT and the amount
of track to erase.
Note: Track cannot be restored once erased.
6. Press the [ENTER] key.
6.6
Marks, Lines
6.6.1
Entering marks
You can inscribe marks on the display to note important points, for example, a buoy or a
wreck. The mark capacity is 6,000 points.
wreck. The mark capacity is 6,000 points.
Selecting method of entry
Marks can be entered by cursor position, L/L position or own ship’s position.
1. Press [NAV MENU], [0], [6] in order.