Furuno FR-2125V Manual De Usuario

You can show the external waypoint from a navaid as follows:

1. Press [NAV MENU], [8] to open WAYPOINT menu.

2. Press the [7] key to select WPT DATA.

3. If NAVAID is not in reverse video, press the [7] key again.

4. Press the [2] key.

5. If ON is not in reverse video, press the [2] key again.

6. Press the [ENTER] key.

Waypoints can be deleted individually, or collectively through the waypoint list.

1. Press [NAV MENU], [4], [3] to display the WPT LIST 1 menu.

2. Press the [0] key to display the page which contains the waypoint you want to delete.

3. Press the [9] key and enter waypoint number in two digits.

4. Press the [ENTER] key.

1. Press [NAV MENU], [9] to display the PLOTTER ERASE menu.

2. Press the [5] key twice followed by the [ENTER] key.

Note: Waypoints used for navigation lines cannot be deleted except by editing or deleting
the navigation line.

30 navigation lines may be entered, and each line may have up to 30 waypoints.

1. Press [NAV MENU], [4] and [5].

2. Press the [2] key.

3. Enter navigation line number in two digits and press the [ENTER] key.

4. Enter waypoint number in two digits and press the [ENTER] key.