Casio signature xj-m255 Manual De Usuario

Remote on

Specifies whether the projector can be turned on via wired LAN while the projector 
is in standby (projector off with power being supplied).
Enable: Power on enabled.
Disable: Power on disabled (initial default).

Important!

Performing the procedure under “To initialize all System Admin page 
settings” (page 36) causes the “Remote on” setting to change to “Disable”. 
If you are controlling the projector via a wired LAN connection, be sure to 
change the “Remote on” setting to “Enable” after you initialize System 
Admin page settings. The “Remote on” setting can also be changed on the 
projector using the setup menu. For full details, see “Wired LAN Settings 
Main Menu (USB Port Models Only)” in the User’s Guide on the CD-ROM 
that comes with the projector.

PJLink authentication

Enables and disables PJLink connection authentication.
Enable: PJLink connection authentication enabled (initial default).
Disable: PJLink connection authentication disabled.

Show User Name Display

Specifies whether the computer’s user name should appear on the projection 
screen when projection starts from a computer connected to the projector via 
wireless LAN.
Initial Default: On (User name displayed.)

New Password
Reinput password

For input of the new password when logging in to the System Admin page.
Initial Default: admin