Casio manager plus fx-9860g Manual De Usuario

13-1

This chapter tells you everything you need to know to transfer programs between two 
CASIO Power Graphic calculators connected using the cable that is equipped as a standard 
accessory.

The following procedure describes how to connect two units with the connecting cable that 
comes equipped as a standard accessory.

S To connect two units

1. Check to make sure that the power of both units is off.

2. Connect the two units using the cable.

• Step 3 is not required on the fx-7400G

II

.

3. Perform the following steps on both units to specify 3PIN as the cable type. 

(1) From the Main Menu, enter the LINK mode. 

(2) Press

(CABL). This displays the cable type selection screen. 

(3) Press

(3PIN).

Cable

• Models that are supported for this configuration are shown below. 

fx-9860G

II

 SD, fx-9860G

II

, fx-9860G AU PLUS, fx-9750G

II

, fx-7400G

II

, fx-9860G Slim 

(OS 2.00/1.11), fx-9860G SD (OS 2.00/1.05), fx-9860G (OS 2.00/1.05), fx-9860G AU (OS 
2.00/1.05), fx-7400G series, CFX-9850G series

You can transfer data between the calculator and a computer by using the Program-Link 
Software (FA-124) and a special cable*

1

 to establish a connection between them.

For details about establishing a connection and data transfer procedures, see the FA-124 
User’s Guide.