Cisco Systems DPC3000 Manual De Usuario

4023034 Rev B 

 

13 

 

The following illustration describes the back panel components of the DPC3000 and 
EPC3000 DOCSIS 3.0 cable modems. 

 

1  REBOOT—Reset-to-Default Momentary Switch (Factory Reset)  

Note: This button is for maintenance purposes only. Do not use unless 
told to do so by your service provider. 

2  ETHERNET—Bridged RJ-45 Gigabit Ethernet port connects to the 

Ethernet port on your PC. This port also supports 10/100BASE-T 
connections 

3  USB—USB 2.0 port connects to the USB port on your PC 
4  CABLE—F-Connector connects to an active cable signal from your 

service provider 

5  POWER—Connects the cable modem to the 12 VDC output of the AC 

power adapter that is provided with your cable modem. Only use the AC 
power adapter and power cord that is provided with your cable modem 

  CAUTION: 

your cable modem.