Casio exilim pro ex-f1 Manual De Usuario

Descargar
Página de 186
50
Snapshot Tutorial
In this mode, half-pressing the shutter button starts continual pre-recording of images 
to a temporary buffer. Then when you press the shutter button the rest of the way 
down, the camera stores what is currently in the buffer and starts continuous shutter 
recording of new images. Recording continues until you release the shutter button or 
until a total of up to 60 images (buffer images plus new images) are recorded. You 
can configure this mode to specify how many of the 60 images are recorded in the 
buffer and how many are recorded after you fully press the shutter button. You can 
use this mode when you want to make sure you do not miss fast-moving action.
• You can specify anywhere from one second up to 60 seconds as the continuous 
shutter shooting time, which is the amount of time of the pre-record buffer plus the 
amount of time that continuous shutter recording is performed after the shutter 
button is pressed all the way. The maximum shooting time depends on the 
selected CS speed. You can select a CS speed in the range of 1 to 60 fps.
• You can configure the mode so all 60 images are stored from the buffer, which 
pre-records images before you fully press the shutter button.
• The minimum interval for images pre-recorded in the buffer is 0.5 seconds and the 
minimum number of pre-recorded images is one.
1.
Set the mode dial to t (Auto).
2.
Set the CS dial to Ø (Prerecord (Still image)).
3.
Use [8] and [2] to select the second control panel option from the 
bottom (Prerecord (Still image) Speed).
Using Prerecord (Still image)
60 images per second (60 fps): You can shoot up to 60 images in one second. 
1 image per second (1 fps)
: You can shoot up to 60 images over 60 seconds. 
Shutter button half-press
Recorded images (up to 60 images)
Continuous recording of images until shutter 
button released*
Shutter button release
Shutter button full-press
*
You can record up to 60 images (pre-recorded buffer images plus real-time images) for 
each Prerecord (Still Image) operation.
Pre-recorded images