Casio QV-2800UX Manual De Usuario
CONNECTING TO EXTERNAL EQUIPMENT
E-119
Connecting the Wired Remote Controller
to the Camera
The optionally available wired remote controller lets you op-
erate the camera with touching it. This capability helps to
avoid the effects of unintended camera movement when
shooting at slow shutter speeds or with high telephoto set-
tings with the camera mounted on a tripod. You can also use
it to scroll through images during presentations on a TV
screen. For more information about using the wired remote
controller, see the instructions that come with it.
erate the camera with touching it. This capability helps to
avoid the effects of unintended camera movement when
shooting at slow shutter speeds or with high telephoto set-
tings with the camera mounted on a tripod. You can also use
it to scroll through images during presentations on a TV
screen. For more information about using the wired remote
controller, see the instructions that come with it.
Wired Remote
Controller Model: WR-1C (QV-2300UX option,
Controller Model: WR-1C (QV-2300UX option,
QV-2800UX bundled accessory)
• You can perform the following operations using the wired
remote controller: shutter release, zoom slider, MENU,
, [+], [–], SHIFT INFO,
,
.
Connecting an External Flash Unit
(QV-2800UX Only)
Use of a commercially available flash unit makes it possible
to obtain a higher level of brightness (guide number) than
you get when using the built-in flash alone. An external flash
also makes it possible to extend the effective range of flash
photography.
• The guide number of the internal flash is 9 (ISO 100/m).
to obtain a higher level of brightness (guide number) than
you get when using the built-in flash alone. An external flash
also makes it possible to extend the effective range of flash
photography.
• The guide number of the internal flash is 9 (ISO 100/m).
External Flash Unit Requirements
The external flash unit you use with your camera must sat-
isfy the following requirements.
• Configuration: tripod hole mountable grip type with sync
isfy the following requirements.
• Configuration: tripod hole mountable grip type with sync
cable; or tripod hole mountable with grip-equipped bracket
and sync cable
and sync cable
• Coverage Angle: Coverage of 40mm equivalent 35mm fo-
cal length lens (without wide conversion lens)
• Some flash performance may be lost when using a ring
flash or other type of unit with a long flash time.
• The aperture values and ISO sensitivity available with
some flash units may not match the values supported by
your camera. In such a case, make adjustments in the ap-
erture and ISO sensitivity settings of the external flash and
the camera until proper brightness is achieved.
your camera. In such a case, make adjustments in the ap-
erture and ISO sensitivity settings of the external flash and
the camera until proper brightness is achieved.
• Some flash performance may be lost when using a zoom
flash.
USB
VIDEO OUT
DC IN 6V
DIGITAL
Wired
Remote
Controller
Remote
Controller
DIGITAL terminal