Casio EX-ZR-410 Manual De Usuario

101

Advanced Settings (REC MENU)

• Only camera shake correction can be used during FHD and STD movie recording.
• Anti Shake correction is not supported during High Speed Movie or HDR Art Movie 

recording.

• When Anti Shake is enabled and “Auto” is selected for “ISO” (page 45), ISO 

sensitivity, aperture, and shutter speed will not appear on the monitor screen when 
you half-press the shutter button. These values will appear in the display of the 
image immediately after it is shot.

• Shooting with Anti Shake enabled can cause an image to appear somewhat 

coarser than normal and can cause slight deterioration of image resolution.

• Anti Shake may not be able to eliminate the effects of camera or subject movement 

when movement is severe.

• Anti Shake may not work properly when the camera is mounted on a tripod. Turn 

off Anti Shake.

• Even if “Strong” is selected for the Anti Shake setting, the “Standard” setting is 

used automatically whenever any setting other than “Auto” is selected for the “ISO 
High Limit” setting.

• Even if “Strong” is selected for the Anti Shake setting, some shooting conditions 

may make it impossible to achieve the desired Anti Shake results. 

Enter the REC Mode * [MENU] * “r REC MENU” Tab * Lighting

You can use this setting to optimize the balance between bright areas and dark areas 
when shooting images.

Performs brightness correction. When this option is selected, it 
takes longer for the image to be stored after the shutter button is 
pressed.

Does not perform brightness correction.