Casio EX-ZR-410 Manual De Usuario

25

Quick Start Basics

Press the memory card and then release it. 
This will cause it to pop out of the memory 
card slot slightly. Pull the card out the rest 
of the way and then insert another one.

• Never remove a card from the camera 

while the back lamp is flashing green. 
Doing so can cause the image save 
operation to fail and even damage the 
memory card.

Format a memory card on the camera before using it for the first time.

• Formatting a memory card that already has snapshots or other files on it, will delete 

its contents. Normally you do not need to format a memory card again. However, if 
storing to a card has slowed down or if you notice any other abnormality, re-format 
the card.

• Be sure to use the camera to format a memory card. Formatting a card on a 

computer will result in a non-SD standard format, which can greatly slow down 
processing time and cause compatibility, performance, and other problems.

• Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi 

Center install files to your computer. Do this before formatting the card.

• Formatting a FlashAir card with the camera will delete files on the card that are 

required for communication. For details about formatting, see the instructions that 
come with the FlashAir card.

Press [4], use [8] and [2] to select the “¥ SETTING” tab, and then 
press [6].

Use [8] and [2] to select “Format” and then press [SET].

Use [8] and [2] to select “Format” and then press [SET].

Use [8] and [2] to select “Yes” and then press [SET].