Crestron c2n-rmak Manual De Usuario

Crestron C2N-RMAK 

 

Rack Mounting Kit 

Use the optional extension brackets to align the device ports with the ports of a 
PRO2 control system or other device of equivalent depth.  

3/32” Hex key 

8-32, 3/8” L Button cap screw (quantity eight, supplied) 

Complete the following assembly procedure in the order provided (refer to 
illustration below).  

1.  Holding the device facing you, position a bracket over the device’s 

mounting holes as shown in the following diagram. 

2.  Thread the supplied screws from the front of the device through the 

holes located on the extension bracket. 

3.  Using a hex key, tighten the screws to secure the extension bracket to 

the device. 

4.  Repeat for the other bracket. 

5.  Position the rack mounting plate holes over the holes of the extension 

bracket. 

6.  Thread the supplied screws from the front of the rack mounting plate 

into the holes located on the extension bracket. 

7.  Using the hex key, tighten the screws to secure the extension bracket to 

the rack mounting plate. 

(SR08-32-0R3750-8)

SCREWS, 
BUTTON HEAD
8-32X3/8"L
(SR08-32-0R3750-8)

BRACKETS
(MTBK02867-1)

PLATE
(MTPL02820-1SS1)

 

•  3