Zebra 49834 Manual De Usuario
Preventive and Corrective Maintenance
Corrective Maintenance—Tear-Off Position Adjustment
57518L-001 Rev. A
3/18/05
170PAX4 Maintenance Manual
151
Tear-Off Position Adjustment
This LCD parameter adjustment sets the rest position of the media over the peel bar after
printing (see
printing (see
). To achieve the proper tear-off position,
press the right oval key to increase the value or the left oval key to decrease the value. Each
press of the key moves the tear-off position by four dot rows (positive values move the media
farther out over the peel bar).
press of the key moves the tear-off position by four dot rows (positive values move the media
farther out over the peel bar).
•
Default: +0
•
Range: –120 to +120
Figure 60 • Tear-Off Position Adjustment
shows how higher values move the label farther out from the print engine (moves
the tear line closer to the leading edge of the next label) while lower values move the label into
the print engine (moves the tear line closer to the edge of the label just printed).
the print engine (moves the tear line closer to the edge of the label just printed).
Media
Direction
Factory-Set
Tear Line
Location is 00