Zebra 49834 Manual De Usuario
Preventive and Corrective Maintenance
Print System—Lower Media Sensor
57518L-001 Rev. A
3/18/05
170PAX4 Maintenance Manual
179
Lower Media Sensor
This procedure is for installing or replacing the lower media sensor. Read these instructions
thoroughly before performing this procedure.
thoroughly before performing this procedure.
Installation Instructions
1.
Refer to
and remove the print engine from the applicator and open
the rear enclosure.
2.
Refer to
and remove the PCB Access Panel.
Remove the Rear Enclosure Frame
1.
. Remove the mounting screw and nut securing the diagonal brace to the
enclosure frame.
Caution • A qualified service technician must perform this installation.
Caution • Turn Off (
O
) the AC power switch and remove the power cord before
performing this procedure.
Note •
Do not remove the AC power connectors from the AC power switch.