Zebra 49834 Manual De Usuario
Preventive and Corrective Maintenance
Printed Circuit Boards—Applicator Interface Board
57518L-001 Rev. A
3/18/05
170PAX4 Maintenance Manual
255
Applicator Interface Board
This procedure is for installing or replacing the applicator interface board. Read these
instructions thoroughly before performing this procedure.
instructions thoroughly before performing this procedure.
Tools Required
Installation Instructions
1.
Refer to
and remove the print engine from the applicator.
Remove the Applicator Interface Board from the Printed Circuit
Board (PCB) Access Panel
Board (PCB) Access Panel
1.
. From the PCB access panel on the back of the printer, remove the two
mounting screws that secure the applicator board.
Phillips Screwdriver
Anti-Static Mat/Wrist Strap
Long 2.5 mm Allen Wrench (Hex Key)
Metric Allen Wrench (Hex Key)
Note •
Retain all parts removed during disassembly, unless otherwise directed.
Note •
The applicator interface board on the left-hand print engines is on the bottom. See
.