ICOM IC-R1500 Manual De Usuario

ii

R

connect the receiver via the

OPC-254L to an AC outlet. This may pose a fire hazard or re-
sult in an electric shock.

R

operate the receiver while dri-

ving a vehicle. Safe driving requires your full attention— any-
thing less may result in an accident.

connect the receiver to a power source of more

than 14 V DC. This will damage the receiver.

connect the receiver to a power source using re-

verse polarity. This will damage the receiver.

cut the DC power cable between the DC plug and

fuse holder. If an incorrect connection is made after cutting,
the receiver may be damaged.

leave the main unit powered ON and connected

to a vehicle’s electrical system. The main unit draws approx.
550 mA. This will eventually drain the vehicle’s battery.

expose the receiver to rain, snow or any liquids.

The receiver may be damaged.

operate or touch the receiver with wet hands. This

may result in an electric shock or damage the receiver.

place the receiver where normal operation of the

vehicle may be hindered or where it could cause bodily injury.

let objects impede the operation of the cooling fan

on the rear panel.

using or placing the receiver in direct sunlight or in

areas with temperatures below –10°C (+14°F) or above
+60°C (+140°F).

The receiver will become hot when op-

erating it continuously for long periods.

setting the receiver in a place without adequate

ventilation. Heat dissipation may be affected, and the receiver
may be damaged.

the use of chemical agents such as benzine or al-

cohol when cleaning, as they can damage the receiver’s sur-
faces.

Changes or modifications to this device, not ex-

pressly approved by Icom Inc., could void your authority to
operate this device under FCC regulations.

PRECAUTIONS