Konica Minolta pi3505e ps driver advanced 1.0.0 Manual De Usuario
3
Network Settings
3-8
Printer Controller Pi3505e Pi3505e/PS
11
If the test prints normally, complete the procedure by clicking
OK
to
close the Properties dialog box.
After you finish installing a printer with the above procedure, you can use
it just as you would any standard local printer. The printer can also be
used as a network printer by other Windows computers on your network
whose Windows NT 4.0 systems are configured the same way as
described above.
it just as you would any standard local printer. The printer can also be
used as a network printer by other Windows computers on your network
whose Windows NT 4.0 systems are configured the same way as
described above.
Configuration Procedure (Windows 2000/XP/Server 2003)
1
Install TCP/IP under Windows 2000/XP/Server 2003.
❍
Refer to the applicable Windows documentation for more
information.
information.
2
Assign the IP parameters.
❍
See “Specifying the IP Address From the Copier’s Touch Panel” on
page 3-2 for more information.
page 3-2 for more information.
3
Use the procedure below to install the printer.
Installing the printer (Windows 2000/XP/Server 2003)
1
Install the printer driver following the instructions that come with the
installer. Make the new printer the default printer.
installer. Make the new printer the default printer.
2
Right-click the new printer icon and select
Properties
from the menu.
3
Display the
Ports
tab.
4
Click
Add Port
.
This displays a list of available port types.
5
Select
Standard TCP/IP Port
from the list, and then click
New Port
.
This starts
Add Standard TCP/IP Printer Port Wizard
.
6
Click
Next
on the introduction page of the wizard.
7
On the
Add Port
page, type the IP address of the Network Card into
the
Printer Name or IP Address
box.
❍
If the network you are on uses DNS (Domain Name Services), type
in the DNS name instead of the IP address.
in the DNS name instead of the IP address.