Kenwood dnx7190hd Manual De Usuario
23
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX
Installation Procedure
Supplied accessories
First of all, make sure that all
accessories are supplied with the
unit.
accessories are supplied with the
unit.
1
...1
7
...6
2
...1
8
...1
3
...2
9
...1
(5 m)
4
...1
0
...1
5
...1
-
...1
(3 m)
6
...6
Unit
1 To prevent a short circuit, remove
the key from the ignition and
disconnect the terminal of the
battery.
disconnect the terminal of the
battery.
2 Make the proper input and
output wire connections for each
unit.
unit.
3 Connect the speaker wires of the
wiring harness.
4 Connect the wiring harness wires
in the following order;
ground, battery, ignition.
ground, battery, ignition.
5 Connect the wiring harness
connector to the unit.
6 Install the unit in your car.
7 Reconnect the terminal of the
7 Reconnect the terminal of the
battery.
8 Press the <Reset> button.
(P.4)
9 Perform the Initial Setup.
See First Step (P.6).
●
Non-Japanese cars
Bend the tabs of the
mounting sleeve
with a screwdriver
or similar utensil and
attach it in place.
Continued