Kenwood dnx7190hd Manual De Usuario

Quick Start Guide

NOTE
• Install the microphone as far as possible 

from the cell-phone.

1)  Engage the catch pins on the 

removal tool (accessory3) and 
remove the two locks on the 
lower level.  
Lower the frame and pull it 
forward as shown in the figure.

3

Lock

Catch

NOTE
• The frame can be removed from the top 

side in the same manner.

2)  When the lower level is removed, 

remove the upper two locations.

1)  Remove the hard rubber frame by 

referring to step 1 in “Removing 
the hard rubber frame”.

2)  Insert the two removal tools 

(accessory3) deeply into the slots 
on each side, as shown.

3

3)  Lower the removal tool toward 

the bottom, and pull out the unit 
halfway while pressing towards 
the inside.

NOTE
• Be careful to avoid injury from the catch 

pins on the removal tool.

4)  Pull the unit all the way out with 

your hands, being careful not to 
drop it.