Kenwood dnx7190hd Manual De Usuario

Quick Start Guide

The first time you turn on this unit, you must 
wait while the system acquires satellite signals 
for the first time. This process could take up 
to several minutes. Make sure your vehicle 
is outdoors in an open area away from tall 
buildings and trees for fastest acquisition.
After the system acquires satellites for the first 
time, it will acquire satellites quickly each time 
thereafter.

When removing the product from the box or 
installing it, the front panel may be positioned 
at the angle shown in (Fig. 1). This is due to the 
characteristics of mechanism the product is 
equipped with.
When the product is first powered on works 
properly, the front panel will automatically move 
into the position (initial setting angle) shown in 
(Fig. 2).

(Fig. 1)

(Fig. 2)

If the faceplate of this unit is stained, 
wipe it with a dry soft cloth such 
as a silicon cloth. If the faceplate 
is stained badly, wipe the stain off 
with a cloth moistened with neutral 
cleaner, then wipe it again with a 
clean soft dry cloth.

• Applying spray cleaner directly to the 

unit may affect its mechanical parts. 
Wiping the faceplate with a hard cloth or 
using a volatile liquid such as thinner or 
alcohol may scratch the surface or erase 
screened print.

If the unit or the connected unit fails 
to operate properly, reset the unit.

The unit returns to factory settings.

NOTE
• Disconnect the USB device before pressing 

the <Reset> button. Pressing the <Reset> 
button with the USB device connected can 
damage the data stored in the USB device. 
For how to disconnect the USB device, see  
How To Play Music (P.16).

• When the unit is turned on after resetting, 

the Initial SETUP screen appears. See  First 
Step (P.6).