Morphy Richards ib40620 Manual De Usuario

○

Important safeguards

When using your iron, basic safety
precautions should always be followed,
including the following:

1 Read all the instructions.
2 Use the iron only for its intended use.
3 To protect against the risk of electric

shock do not put the appliance in
water or in any other liquid.

4 Close supervision is necessary when

any appliance is used near children.
NEVER ALLOW A CHILD TO USE
THIS PRODUCT.

5 The socket should always be switched

off before plugging or unplugging from
the socket. Never yank the cord to
disconnect from socket, instead,
grasp plug and pull to disconnect.

6 Do not allow the cord to touch hot

surfaces. Let the iron cool completely
before putting away. Loop the cord
loosely around the iron before storing.

7 Always disconnect the iron from the

electrical socket when filling with water
or emptying, and when not in use.

8 Do not use outdoors.
9 Do not operate the iron with a

damaged cord or if the iron has been
dropped or damaged. To avoid the risk
of electric shock, do not disassemble
the iron, but telephone Morphy
Richards for advice. Incorrect
reassembly can cause a risk of
electric shock when the iron is used.

10 Do not use the vertical steam feature

on clothes that are being worn.

11 Do not leave the iron unattended

whilst plugged in or on an ironing
board. Never allow the mains lead to
over hang the work surface.

12 Burns can occur from touching hot

metal parts, hot water or steam. Use
caution when you turn a steam iron
upside down, there may be hot water
in the water tank.

○

Special instructions

1 If your iron does not work, check the

following points:
Has the temperature control been set
to the required temperature? Is the
plug in its socket? Is the plug itself or
the socket faulty? (Check by plugging
in another appliance).

2 Warning : When not in use, your

iron should never be placed flat and
left on an ironing board.

3 To prevent damage to the textile being

ironed, follow the temperature guide
carefully. (Test the inside of the hem of
the garment).

4 When ironing is complete, remove the

plug from the socket, empty any
remaining water from the tank, and
allow to cool before storage.

5 If you drop or severely knock your iron

this could cause internal damage even
if the outside appears alright. Have it
checked by a qualified electrician.

6 It is recommended that you use up

one beaker of water by operating your
iron’s steam and shot of steam
functions before ironing any clothes as
some dripping may occur while your
iron’s steam system is activated.

SAVE THESE
INSTRUCTIONS

DIGITAL SYEAM

13/8/02, 12:29 PM