Crestron smk-12 smk-15 smk-17 Manual De Usuario
Crestron SMK-12/15/17
Swivel Mount Kit
Swivel Mount Kit: SMK-12/15/17
Introduction
The Swivel Mount Kit, SMK-12/15/17 is designed for the TPS-12/15/17, TPS-G and
TPMC-15/17 family of Crestron
TPMC-15/17 family of Crestron
tilt touchpanels with the required rectangular
cutout in the base of the unit as shown in the drawing on page 2.
The SMK-12/15/17 is a sturdy mounting option that provides cable management,
wire strain relief, and prevents unauthorized users from disconnecting and removing
the touchpanel. The opening at the rear of the SMK-12/15/17 is sized to
accommodate all of the cables that would typically be connected to the touchpanel,
allowing them to be hidden from view by routing them down through the mounting
surface through the center opening.
wire strain relief, and prevents unauthorized users from disconnecting and removing
the touchpanel. The opening at the rear of the SMK-12/15/17 is sized to
accommodate all of the cables that would typically be connected to the touchpanel,
allowing them to be hidden from view by routing them down through the mounting
surface through the center opening.
The SMK-12/15/17 swivel mount kit reduces the chance of theft while improving
viewing convenience. The base rotates 330 degrees, mounts on the desktop, in a
lectern, or on a conference table, and accommodates surface thicknesses from
3/4-inch (19 mm) minimum to 1 3/8-inches (35 mm) maximum, using the hardware
provided.
viewing convenience. The base rotates 330 degrees, mounts on the desktop, in a
lectern, or on a conference table, and accommodates surface thicknesses from
3/4-inch (19 mm) minimum to 1 3/8-inches (35 mm) maximum, using the hardware
provided.
Supplied Hardware
The hardware supplied in the kit is listed in the following table.
Supplied Hardware of the SMK-12/15/17 Swivel Mount Kit
DESCRIPTION
PART NUMBER QUANTITY
Swivel Mount Assembly
4500093
1
Swivel Mount Plate
2014302
1
Security Plate
2004824
1
Screw, 08-32, 1/4"L, pan phillips
2007263
4
Screw, 08-32, 1"L, pan phillips
2007276
4
Screw, 08-32, 5/8" L, pan phillips
2007274
4
Screw, 08-32, 1/4” L, pan phillips, undercut
2014325
4
Overlay Template, Cutout
2005027
1
Installation Guide – DOC. 6467
Swivel Mount Kit: SMK-12/15/17
• 1