winternals erd commander pro 1.03 Manual De Usuario
ERD Commander
Version 1.03
Winternals Software LP
Page 4
2
ERD Commander Setup
2.1 Requirements
ERD Commander requires the Microsoft Windows NT
©
4.0 installation CD-
ROM to create a set of boot diskettes. The disks can be used to access both
NT 4.0 and 3.51 systems.
You will need three blank floppy diskettes. Optionally, you can supply an
existing set of Windows NT Setup diskettes, which ERD Commander will
modify. Please note that such modification is permanent; you will not be able
to reinstall NT from those disks in the future.
Additionally, you must have local administrator access to the machine on
which you are installing ERD Commander.
2.2
Creating the Boot Diskettes
When the ERD Commander Setup program is executed, it will allow you to
create a set of Windows NT boot floppies configured with ERD Commander.
You will be prompted for the Microsoft Windows NT
©
4.0 Installation CD-ROM
and for the three floppy diskettes.
The Setup program will install two versions of the boot floppy creator onto
your hard drive. The 32–bit version is the program that is run during the initial
Setup. The 16–bit version allows you to configure boot floppies with ERD
Commander from a DOS boot floppy or from Windows 3.1. This is necessary
in cases where your Windows NT installation is non–bootable and you do not
have access to a second NT machine or to Windows 95.