caddx nx8-e Manual De Usuario
15
SERVICE MENU
The service light will be “on” if the security system requires service. If the service
light is “on”, press the [
7
] key followed by the [2] key to determine the service
condition. One or more zone lights will illuminate indicating what service(s) is
required. Call your service provider immediately for these problems. Below is a
listing of what each light means in a service condition.
required. Call your service provider immediately for these problems. Below is a
listing of what each light means in a service condition.
LIGHT
PROBLEM
SYSTEM FAULT - Press the [1] key. The zone light(s) that is
illuminated corresponds to the system fault(s) below:
1 Over Current Fault
2 Siren
1 Over Current Fault
2 Siren
Trouble
3 Box
Tamper
4 Expander
Power
5 Expander Low Battery
6 Expander Box Tamper
7 Expander
6 Expander Box Tamper
7 Expander
Trouble
8 Ground
Fault
1
Note: Faults 1 & 2 are global in nature and will affect all
partitions of a multi-partition system. Press the [#] key to return
to the 1 of 8 service lights.
partitions of a multi-partition system. Press the [#] key to return
to the 1 of 8 service lights.
2
ZONE TAMPER - Press the [2] key and the zone light(s) will illuminate
showing the zone(s) that are tampered. Press the [#] key to return to
the 1 of 8 service lights.
the 1 of 8 service lights.
3
ZONE LOW BATTERY - Press the [3] key. The zone light(s) will
illuminate showing which zone(s) has a low battery. This only
applies to wireless zones. Press the [#] key to return to the 1 of 8
service lights.
applies to wireless zones. Press the [#] key to return to the 1 of 8
service lights.
4
ZONE LOSS OF SUPERVISION - Press the [4] key and the zone
light(s) will illuminate showing which zone(s) has loss of supervision.
This only applies to wireless zones. Press [#] key to return to the 1
of 8 service lights.
This only applies to wireless zones. Press [#] key to return to the 1
of 8 service lights.
5
ZONE TROUBLE - Press the [5] key and the zone light(s) will
illuminate showing which zone(s) has a trouble condition. Press the
[#] key to return to the 1 of 8 service lights.
[#] key to return to the 1 of 8 service lights.
6
TELEPHONE LINE TROUBLE/LINE CUT - This light will illuminate
when there is telephone line trouble or the telephone line has been
cut. Press the [6] key. If LED 6 illuminates, the telephone line has
the trouble. If LED 7 illuminates, the cellular device has the trouble.
The service light will remain lit until the telephone trouble clears and
a user code is entered. Note: This fault is global in nature and
will affect all partitions of a multi-partition system.
cut. Press the [6] key. If LED 6 illuminates, the telephone line has
the trouble. If LED 7 illuminates, the cellular device has the trouble.
The service light will remain lit until the telephone trouble clears and
a user code is entered. Note: This fault is global in nature and
will affect all partitions of a multi-partition system.
7
FAILURE TO COMMUNICATE - This light will illuminate when there is
a failure to communicate between your system and the central
station. Note: This fault is global in nature and will affect all
partitions of a multi-partition system.
station. Note: This fault is global in nature and will affect all
partitions of a multi-partition system.
8
LOSS OF SYSTEM TIME - This light will illuminate when there has
been a loss of power and your system clock needs to be reset.
Instructions are on page 13. Note: This fault is global in nature
and will affect all partitions of a multi-partition system.
Instructions are on page 13. Note: This fault is global in nature
and will affect all partitions of a multi-partition system.
To exit the Service Light Mode - press the [#] key.