Terratec cinergy800epvr Manual De Usuario
Setting up the hardware and installing drivers.
The following sections describe how to connect your Cinergy 800e PVR to your computer and
install the drivers.
install the drivers.
Connecting to the USB 2.0 port.
1. Boot your computer and wait until the operating system has loaded completely. Plug the
Cinergy 800e PVR into an available USB2.0 port on your laptop or computer. To do so, use
the USB2.0 cable provided.
the USB2.0 cable provided.
2. Please continue with the driver installation.
Installing the drivers in Windows XP (Service Pack 2 or higher)
Once you have connected the Cinergy 800e PVR to a USB 2.0 port on your PC, a message
bubble over the system tray will tell you that Windows has found new hardware—the Cinergy
800e PVR. The Windows setup wizard will now appear.
bubble over the system tray will tell you that Windows has found new hardware—the Cinergy
800e PVR. The Windows setup wizard will now appear.
Insert the TerraTec Cinergy 800e PVR installation & software CD-ROM into your CD-ROM drive.
When the dialog asks if you want to establish a connection to Windows Update, select “No,
not this time”. In the next step, select “Install the software automatically (recommended)” and
click “Next” to install the drivers.
When the dialog asks if you want to establish a connection to Windows Update, select “No,
not this time”. In the next step, select “Install the software automatically (recommended)” and
click “Next” to install the drivers.
Once the setup wizard has found the drivers on the installation & software CD-ROM, Windows
will display a message indicating that the drivers have not passed the Windows logo test. It is
safe to ignore this information and continue the installation by clicking “Continue anyway”.
will display a message indicating that the drivers have not passed the Windows logo test. It is
safe to ignore this information and continue the installation by clicking “Continue anyway”.
Click “Finish” to complete the installation once the driver files have been copied.
Windows will now display another message bubble to indicate that the Cinergy 800e PVR has
been installed successfully.
been installed successfully.
The installation was completed successfully.
To be sure, open the Device Manager (Start Control Panel System Hardware tab
Device Manager) and expand the “Sound, video and game controllers” entry. If the “Cinergy
800e PVR” is not marked with a yellow exclamation point, then the installation was success-
ful.
Device Manager) and expand the “Sound, video and game controllers” entry. If the “Cinergy
800e PVR” is not marked with a yellow exclamation point, then the installation was success-
ful.
10
Cinergy 800e PVR Hardware (English)