Lowrance lmf-400 Manual De Usuario

9 

The displays and settings in this digital gauge are controlled by a five-

button keypad. The buttons are 

, 

, 

, 

 and 

. The 

 key gives you access to the basic menu. The 

and

keys 

are used to scroll through and highlight menu items. The 

 

key (also referred to as the 

 key) allows you to scroll forward 

through pages, execute commands and select items from menus. The 

 key is used to close menus and scroll backward through pages. 

 

When the LMF-400 is turned on the first time, the Boat Setup  menu 

will appear. You will not be able to proceed without completing Boat 

Setup. If, however, you have one or more of the following devices — 

Suzuki Engine Interface, EP-10 Fuel Flow, EP-15 Fluid Level, EP-45 

Pressure Sensor or an EP-50 Storage Device — already configured in 

the network with the same engine-tank configuration, you WILL NOT 

have to go through boat setup when adding a new gauge to the 

network. After adding the gauge to the network, the Boat Setup menu 

will be cleared from the screen and the unit will begin normal 

operation in 1-2 seconds.    
NOTE: 

If you add an EP-10 Fuel Flow, EP-15 Fluid Level, EP-45 Water 

Pressure or EP-50 Storage Device sensor to the network, you must 

go through Boat Setup so the engine-tank configuration will be 

consistent among sensors on the network.  

 To execute Boat Setup: 
1. With Boat Setup highlighted on the screen, press 

. A menu 

will appear, allowing you to choose the number of engines and fuel 
tanks on your vessel. The Boat Setup menu options are: 1 Eng/1 Tank,

1 Eng/2 Tank,

2 Eng/1 Tank,

2 Eng/2 Tanks,

3 Eng/1 Tank or

3 Eng/3 

Tanks.