Manualsbrain.com
  1. Manuales
  2. Marcas
  3. E-Mu
  4. orbit v2
  5. Manual De Usuario

E-Mu orbit v2 Manual De Usuario

Descargar
Página de 140
Orbit V2 Operation Manual
30
MASTER MENU
• Send MIDI Data
This function will send MIDI System Exclusive data to the MIDI Out
port of Orbit. The MIDI data can either be sent to a computer,
sequencer or to another Orbit. Using the cursor key and the data entry
control, select the type of MIDI data you wish to transmit.
User Beat Data
Transmits all User Beat data (tempos, X factor, preset) and all user
Song Beat data (events, repeats, jumps).
Master Settings
Transmits all parameters in the Master menu except tuning table,
program/preset map and viewing angle.
Program/ Preset Map
Transmits only the program/preset map.
Tuning Table
Transmits only the user tuning table.
Factory Presets
Transmits all the factory ROM presets.
User Presets
Transmits all the user presets.
Any Individual Preset
Transmits only the selected preset.
The Enter LED will be flashing. Press the Enter button to confirm the
operation. To receive MIDI data, simply send the MIDI data into Orbit
from another Orbit or your sequencer.
SEND MIDI DATA
000 Stereo Piano
To Record MIDI Data into a Sequencer:
1. Setup sequencer to receive system exclusive data.
2. Place sequencer into record mode, then Send Preset Data.
To Receive MIDI Data from a Sequencer:
1. Simply play back the sequence into Orbit.
▼ Warning: 
 Send data as you would a regular sequence. Sending data
in one huge chunk may clog the MIDI input buffer on Orbit.
••• The Preset, Volume, and
Pan information for all 16
channels is included when
the  Master settings are
transmitted or received.
▼ Warning: When transfer-
ring SysEx data from one
Orbit to another, the ID
numbers of both units must
match.