giant-bicycles 2002 to present suspension supplement manual Manual De Usuario

18

Setup for Air Shock (See Drawing #12):

1)

For initial setup, set the positive air chamber (A) to the rider’s weight.

2)

To measure the travel, you can position the rubber “O” ring on the shaft to
the top of the shock to measure the amount of compression/movement.

3)

If the shock moves less than 10mm, reduce the air pressure in the  positive
air chamber (A).

4)

If the shock moves more than 10mm, increase the air pressure in the positive
air chamber (A).

5)

If you have difficulty with set-up, please see your Authorized Giant Dealer.

Drawing #12