husky-liners 7040 Manual De Usuario
7040.doc
03/09/2004
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest
way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work well. Use of
Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR DODGE
DURANGO THIRD SEAT FLOOR LINER
TO INSTALL YOUR DURANGO THIRD SEAT LINER (PART #7040), JUST FOLLOW THESE EASY
STEPS: FIRST, POSITION THE THIRD SEAT IN ITS NORMAL “USE” POSITION. SECOND, RELEASE
AND FOLD FORWARD BOTH OF THE INDIVIDUAL SECOND SEATS ALLOWING ACCESS TO THE
THIRD SEAT. WITH THIS DONE, YOU CAN EASILY INSTALL YOUR LINER. ONCE YOU HAVE THE
LINER INSTALLED, FOLD THE SECOND SEATS BACK INTO PLACE, MAKING SURE THAT THEY
ARE SECURELY LATCHED. NOTE, THIS LINER IS NOT DESIGNED FOR THE 1997-2003 MODEL
DURANGO. IF YOU NEED A PART FOR THESE MODELS YEARS, PLEASE SEE YOUR RETAILER OR
CONTACT US AT 800-344-8759.
STEPS: FIRST, POSITION THE THIRD SEAT IN ITS NORMAL “USE” POSITION. SECOND, RELEASE
AND FOLD FORWARD BOTH OF THE INDIVIDUAL SECOND SEATS ALLOWING ACCESS TO THE
THIRD SEAT. WITH THIS DONE, YOU CAN EASILY INSTALL YOUR LINER. ONCE YOU HAVE THE
LINER INSTALLED, FOLD THE SECOND SEATS BACK INTO PLACE, MAKING SURE THAT THEY
ARE SECURELY LATCHED. NOTE, THIS LINER IS NOT DESIGNED FOR THE 1997-2003 MODEL
DURANGO. IF YOU NEED A PART FOR THESE MODELS YEARS, PLEASE SEE YOUR RETAILER OR
CONTACT US AT 800-344-8759.
FRONT OF VEHICLE
7040