Kofax vrs4 Manual De Usuario
Chapter 2
28
VRS User’s Manual
Each panel affects a different aspect of the image:
• Clarity: Use these settings to update the brightness, contrast, and gamma
• Clarity: Use these settings to update the brightness, contrast, and gamma
values.
• Noise: Use these settings to adjust the appearance of lines and speckles.
• Skew: Use these settings to straighten images and enable automatic
deskew, auto crop, edge cleanup, or auto orientation.
• Color: Use these settings to enable automatic color detection and related
settings.
• Background: Use these settings to control processing for the background
region of color documents.
Note
The availability of the panels may vary, according to the features
supported for the selected scanner and the active scanning mode (color or
bitonal). Also, a VRS Plus license is required to access some panels.
For details about individual panels, refer to Using the VRS Adjustment Controls
3
Do one of the following:
• Click OK to apply the adjustments to the exception image.
• Click OK to apply the adjustments to the exception image.
• Click Cancel to exit without applying adjustments to the exception image.
In this case, an error will be returned (without the image) to the scanning
application.
• Click Reset to cancel any adjustments and restore the settings to their
original values. Then continue by saving or adjusting the original settings.
Creating a Profile
If you use the VRS Adjustment Controls panel to customize image property settings,
you can save and reuse them later. Each group of settings is called a “profile.” We
recommend that you do not make changes to the “Default settings” profile, because it
cannot be restored without using a special utility. For more information about VRS
X To create a profile
1
Use the VRS Adjustment Controls panel to update the image property
settings.
2
From the menu, select Profile | Save As.
3
When the New Profile dialog box displays, as shown in Figure 2-24, type a
name for the profile and click OK.