Kofax vrs4 Manual De Usuario

Operating VRS

VRS User’s Manual

You can use the Kofax VRS ImageControls interface to control scanner functions. 

Under General, you can select from the following options:

• Source: Lists the available input paper source as Flatbed, ADF, Manual, or 

Panel. Depending upon the capabilities of the selected scanner, some sources 

may not be available.

• Destination: Lists the output tray (usually Bin 1 or Bin 2) for the pages to be 

scanned. Depending upon the capabilities of the selected scanner, some trays 

may not be available.

• Resolution (DPI): Select an option for scan resolution or DPI.
• Paper Size: Lists the paper size (Letter, Legal, A5, etc.) supported by the 

selected scanner.

• Orientation: Lists the paper orientation (portrait or landscape) for the 

documents that you plan to scan.

Other options on the ImageControls scanning interface include the following:

• Timeout: Select the number of seconds allowed for you to load paper into the 

scanner after starting a scan operation. Once the timeout interval is exceeded, 

the operation will time out and report an out of paper error. 

• Color Mode: Select the color mode (color, black and white, grayscale) for the 

scan operation. The color mode determines the number of colors or shades of 

gray into which the scanned page is translated. The availability of the color 

modes is dependent upon the capability of the selected scanner. The color 

mode selection also affects the availability of VRS features.

• Other: Select options associated with automatic length detection, continuous 

sheet operation, and manual start. The availability of these options is 

dependent upon the capability of the selected scanner. For more information, 

press F1 from the Scanner Properties dialog box.

• Sides: Select either single-sided or duplex, according the number of sides that 

will be scanned at one time. Some scanners do not support duplex scanning.

Click the Options button to access a Source Properties dialog box, which is used to 

specify preferences for your image source. For more information, press F1 from the 

Scanner Properties dialog box.

Click the Advanced button to open the VRS Interactive Viewer.

With ImageControls scanning applications, the option that you select to start 

scanning is usually available as a menu command that is separate from the scanner 

property settings.

For more information, refer to your ImageControls documentation.