BOSS mr1515b-round remote- Manual De Usuario

12

Press and hold SEL button for 2
seconds to turn this function on/off.

Press LOUD/DIM button (15) to
enhance bass response at low volume
levels. LOUD will appear in the display.
Press this button again to defeat the
function.

Press LOUD/DIM button (15) for more
than 2 seconds to adjust the brightness
of the LCD display backlight.

In radio/AUX IN mode, press 
/MUTE button (3) to mute audio level.
Press the button again to release mute
function.

Press MODE button (6) to choose
desired listening mode. (e.g. radio
mode to CD mode to CDC mode to
AUX IN mode.

Press DISP button (1) for more than 2
seconds until the clock is shown on
the display and flashes. Then press the

 button (17) to change minutes or

button   (16) to change hours.

Clock Priority
Press and hold DISP button (1) while
pressing   button (16) to select Clock
Priority.
Pressing DISP button (1) while in Clock
Priority will temporarily display selected
station frequency (in RADIO mode) or
track number (in CD/CDC mode) or
state information (in AUX IN mode).

Press and hold DISP button (1) while
pressing   button (17) to select
Frequency Priority.
Pressing DISP button (1) while in
Frequency Priority will temporarily
display clock.

Programs the unit to display the time
when the unit is turned off. While the
unit is turned on, press and hold the
MODE button (6). Then use the M2
button to activate or defeat this feature.

Exhibit current frequency and activated
functions on the display (8).

Press and hold this button for 10
seconds using a ball-point pen or other
thin metal object. The reset button is
to be activated for the following
reasons:
- Initial installation of the unit when

all wiring is completed.

- All the function buttons do not

operate.

- Error symbol on the display.
NOTE: If the unit is non-responsive
after pressing the reset button use a
cotton swab soaked in isopropyl
alcohol to clean the electrical contact
on the reverse side of the front panel.