Belinea 101901 Manual De Usuario

 

 

  Belinea 10 19 01 - Operating Instructions - 4

Carefully lift the monitor out of the packaging and make 
sure that all components are included (see fi g. 1).

Save the original box and packing material in case you 
have to ship or transport the monitor.

To set up the device, you must fi t the monitor base 
together.

1.  First start your PC and then turn on your Belinea 

monitor using the power switch (

 in fi g. 4). The 

status indicator (

 in fi g. 4) should light up green.

2.  Adjust the image to meet your requirements (see the 

following sections “Basic Setup” and “Image settings 
using the OSD menu”). 

3.  If there is no image displayed on the monitor, consult 

the section “Troubleshooting”.

➧ To connect the monitor to your PC ........................
1.  Make sure that the PC and monitor are unplugged. 

2.  Connect the 15-pin signal cable to the PC (see 

fi gure 2).

➧ To connect the monitor to the power source ........
Connect the separate power cable (

 in fi g. 3) to the 

monitor and a grounded outlet.

➧ Connecting the audio cable  ...................................
If your computer is equipped with an audio output port, 
then connect one end of the sound cable to the audio 
input connector of the monitor (

 in fi g. 3) and the other 

end to the Line-Out connector of the computer. 

1