Belinea 101935 Manual De Usuario

 

 Belinea 10 19 35 - Operating Instructions - 5

➧ Monitor setup under Windows

If using the monitor under Windows

 9x/ME/2000 or 

XP, we strongly recommend installing the Belinea con-
fi guration fi le. You can obtain this fi le from your Belinea 
dealer or download it from the MAXDATA FTP server at 
ftp.maxdata.com.
Here, click the “Belinea_Treiber_Driver” directory and 
download the Belinea.inf and README_Belinea.TXT 
fi les. Follow the installation instructions in the README_
Belinea.TXT fi le.

➧ Monitor setup under Windows

Under Windows

  NT  4.0  no  separate  setup  file  is 

required. Select the vertical frequency and the number 
of colors directly from within the “Settings” 

 “Control 

Panel” 

 “Display”  “Settings” menu.

➧ Automatic Image Adjustment .................................
You can adjust the image settings (such as image posi-
tion, phase, etc) manually or by using the LCD monitor’s 
automatic image adjustment feature. This will adjust the 
image parameters to their optimal settings for the cur-
rent graphics mode. Press AUTO (

 in fi g. 4) to launch 

the automatic adjustment. The process will take a short 
while until completed.

➧ Disabling the sound (MUTE) ...................................
You can mute or activate sound playback by pressing 
the 

 

button (

 

in fi g. 4) while the OSD menu is not 

displayed. 

➧ Select the input signal (INPUT SELECT) ...............
Use the key 

(

 

in fi gure 4) to select the input signal. 

The monitor offers the following connection options: 
analogue graphics card via the 15-pin Mini-D-SUB port 
(see fi gure 2a); digital graphics card via the DVI-D port 
(see fi gure 2b). 

2.  There are a total of 6 OSD submenus divided by 

categories. Select the desired submenu by press-
ing the OSD button 

 

or 

 (

 and 

 in fi g. 4; see 

section “OSD Menu Functions”). 

3. Press the 

  button (

  in  fi g.  4)  to  activate  the 

selected function or associated submenu.

4.  If you selected a submenu, now select the subfunc-

tion you want using the 

 

or 

 (

 and 

 in fi g. 4) 

OSD buttons. 

5.  Set the desired value using the OSD button 

 

or 

 

(

 and 

 in fi g. 4). The new settings will take effect 

immediately.

 

 

6.  Repeat steps 2–5 to make further adjustments as 

needed.  

7.  The OSD menu automatically disappears if no 

changes are made for more than 30 seconds (default 
setting). The current settings will be saved. You can 
close it manually by pressing the MENU button (

 

in fi g. 4). 

The OSD menu is a window on your screen that allows 
you to view and change display settings. To change an 
OSD setting:

1. Press the MENU button (

 in fi g. 4) to display the 

OSD menu on the screen. 

➧ Locking and Unlocking the OSD .............................
To lock and unlock the OSD menu, hold down the button 
combination MENU (

 in fi g. 4) and 

 (

 in fi g. 4) until 

a corresponding message is displayed.