opcode studio 4 Manual De Usuario

it’s open—the window continues to work 
with the Studio 4 that was selected before 
it was opened. The Stripe SMPTE window 
shows the name of the Studio 4 with 
which it works.

Follow through these tutorial sections to 
learn how to stripe a tape with SMPTE 
timecode and sync to it.

Unless you already have tapes with 
SMPTE on them, you will need to put 
SMPTE timecode onto a blank tape. This 
process is usually called “striping” a tape 
with SMPTE.

To stripe a new tape with SMPTE time-
code, familiarize yourself with the Stripe 
SMPTE window as well as the operation 
of your tape recorder. A typical striping 
operation might go something like this:
햷

햸

햹

Choose Stripe SMPTE from the 
Studio 4 menu to open the Stripe 
SMPTE window.

햺

Enter the SMPTE frame rate using the 
Frame Rate pop-up menu. Enter a 
Start time. If you wish the striping to 
stop automatically, enter a Stop time 
and check the Stop check box. If 
desired, enter the User Bits. Set a 
SMPTE output level.

햻

햽

햾

Click the Start Striping button in the 
Stripe SMPTE window.

The Studio 4 SMPTE/Power LED will 
begin to flash. You should see the 
SMPTE signal level on your recorderÕs 
input meters. Verify that the proper 
amount of SMPTE signal is going onto 
tape.

Studio 4 Name