opcode studio 4 Manual De Usuario
CHAPTER 9: SMPTE Reader Window
Studio 4 Manual
59
USING WITH MULTIPLE
STUDIO 4’S
STUDIO 4’S
The SMPTE Reader displays the time-
code received at the SMPTE IN jack of
the selected Studio 4. You must select a
Studio 4 from the bottom of the Studio 4
menu before opening the SMPTE Reader
window. The SMPTE Reader window isn’t
affected by new Studio 4 selections after
it’s open—the window continues to work
with the Studio 4 that was selected before
it was opened. The SMPTE Reader
window shows the name of the Studio 4
with which it works.
code received at the SMPTE IN jack of
the selected Studio 4. You must select a
Studio 4 from the bottom of the Studio 4
menu before opening the SMPTE Reader
window. The SMPTE Reader window isn’t
affected by new Studio 4 selections after
it’s open—the window continues to work
with the Studio 4 that was selected before
it was opened. The SMPTE Reader
window shows the name of the Studio 4
with which it works.
Figure 9.3: Studio 4 Identification in SMPTE
Reader Window
Reader Window
NOTE: If you have two Studio 4's connect
in a 1-Network/1-Cable fashion (see
Chapter 3), then you should use the
Studio 4 connected directly to the Macin-
tosh for SMPTE functions.
in a 1-Network/1-Cable fashion (see
Chapter 3), then you should use the
Studio 4 connected directly to the Macin-
tosh for SMPTE functions.
Studio 4 Name