sentrol zxled12 Manual De Usuario
24
RF Signal Strength
(ZX400/ZX410 only)
If your system includes wireless sensors, then you can test the strength
of signals from these sensors by performing an RF Signal Strength test.
The strength of a signal can be affected by a low battery condition on
the sensor or changes in the environment due furniture or appliances.
of signals from these sensors by performing an RF Signal Strength test.
The strength of a signal can be affected by a low battery condition on
the sensor or changes in the environment due furniture or appliances.
To test the signal strength of selected RF Zones:
1.
Press .
2.
Enter passcode: .
3.
Press .
4.
Enter a number between 13 and 28 to select a wireless sensor to
test. See Protection Zones for a list of zone numbers and descriptions.
test. See Protection Zones for a list of zone numbers and descriptions.
Press . The Control Station will indicate the signal strength by:
Error Tone
(the selected zone is not RF or is missing)
One Beep
(call your installation representative)
Three Beeps (acceptable)
Five Beeps
(strong)
5.
Repeat step 4 or press to exit.
TESTING YOUR SYSTEM
8
6
CLEAR
ENTER