Carvin vts Manual De Usuario
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SAFETY INSTRUCTIONS (EUROPEAN)
The conductors in the AC power cord are colored in accordance with the following code.
GREEN & YELLOW—Earth BLUE—Neutral BROWN—Live
U.K. MAIN PLUG WARNING: A molded main plug that has been cut off from the cord is
unsafe. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED
OR CUT MAIN PLUG INTO A POWER SOCKET.
unsafe. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED
OR CUT MAIN PLUG INTO A POWER SOCKET.
IMPORTANT! FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:
WATER AND MOISTURE: Appliance should not be used near water (near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken
so that objects do not fall and liquids are not spilled into the enclosure through openings.
POWER SOURCES: The appliance should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polar-
ization means of an appliance is not defeated.
POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely
to be walked on or pinched by items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
SERVICING: The user should not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to qualified service personnel.
FUSING: If your unit is equipped with a fuse receptacle, replace only with the same type fuse.
Refer to replacement text on the unit for correct fuse type.
kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken
so that objects do not fall and liquids are not spilled into the enclosure through openings.
POWER SOURCES: The appliance should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polar-
ization means of an appliance is not defeated.
POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely
to be walked on or pinched by items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
SERVICING: The user should not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to qualified service personnel.
FUSING: If your unit is equipped with a fuse receptacle, replace only with the same type fuse.
Refer to replacement text on the unit for correct fuse type.
This symbol is intended to
alert the user to the pres-
ence of uninsulated “dan-
gerous voltage” within the
alert the user to the pres-
ence of uninsulated “dan-
gerous voltage” within the
product’s enclosure that may be of suf-
ficient magnitude to constitute a risk of
electric shock to persons.
ficient magnitude to constitute a risk of
electric shock to persons.
This symbol is
intended to alert the
user to the presence of
important operating
and maintenance (servicing) instruc-
tions in the literature accompanying
the appliance.
intended to alert the
user to the presence of
important operating
and maintenance (servicing) instruc-
tions in the literature accompanying
the appliance.
LIMITED WARRANTY
Your Carvin product is guaranteed against failure for ONE YEAR unless otherwise stated. Vacuum
tubes are guaranteed for 90 days. Carvin will service and supply all parts at no charge to the customer
providing the unit is under warranty. Shipping costs are the responsibility of the customer. CARVIN
DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE ORIGINAL
INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility for horn dri-
vers or speakers damaged by this unit. This warranty does not cover, and no liability is assumed, for
damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incorrect
use, or failure to follow instructions. This warranty is in lieu of all other warranties, expressed or implied.
No representative or person is authorized to represent or assume for Carvin any liability in connection
with the sale or servicing of Carvin products. CARVIN SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
providing the unit is under warranty. Shipping costs are the responsibility of the customer. CARVIN
DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE ORIGINAL
INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility for horn dri-
vers or speakers damaged by this unit. This warranty does not cover, and no liability is assumed, for
damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incorrect
use, or failure to follow instructions. This warranty is in lieu of all other warranties, expressed or implied.
No representative or person is authorized to represent or assume for Carvin any liability in connection
with the sale or servicing of Carvin products. CARVIN SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
When RETURNING merchandise to the factory, you may call for a return authorization number. Describe
in writing each problem. If your unit is out of warranty, you will be charged the current FLAT RATE for
parts and labor to bring your unit up to factory specifications.
parts and labor to bring your unit up to factory specifications.
HELP SECTION
1) AMP WILL NOT TURN ON
1) AMP WILL NOT TURN ON
Check the power to the amp. Check for tripped circuit breakers, unplugged extension cords or power-
strip switches that may be turned off. Check the fuse. If a dark brownish color or no wire can be
seen within the glass tube, then replace. The amp may be perfectly fine but occasionally a fuse
may blow because of high AC voltage surges. After the fuse has been replaced with the proper
Slow Blow value and if the fuse fails again, the amp will require servicing.
strip switches that may be turned off. Check the fuse. If a dark brownish color or no wire can be
seen within the glass tube, then replace. The amp may be perfectly fine but occasionally a fuse
may blow because of high AC voltage surges. After the fuse has been replaced with the proper
Slow Blow value and if the fuse fails again, the amp will require servicing.
2) NO OUTPUT with POWER LIGHT ON
Tubes damaged in shipping will be the primary reason for your amp to not function properly. Please
give us a call to help guide you through this simple repair.
give us a call to help guide you through this simple repair.
3) KEEP YOUR AMP LOOKING NEW
Use a damp cloth to wipe the controls on the front & rear chassis panels. Wipe the black vinyl cov-
ering with a damp cloth.
ering with a damp cloth.
REFER SERVICING TO QUALIFIED SER-
VICE PERSONNEL! THIS UNIT CON-
TAINS HIGH VOLTAGE INSIDE!
VICE PERSONNEL! THIS UNIT CON-
TAINS HIGH VOLTAGE INSIDE!
CAUTION
RISK OF ELECTRIC SHOCK
Ref. #
Description
Carvin PN
B1
Junper, 0.5”, 0
Ω
51-00050
B2
Junper, 0.35”, 0
Ω
50-00035
B3
Junper, 0.5”, 0
Ω
51-00050
B4
Junper, 0.5”, 0
Ω
51-00050
B5
Junper, 0.5”, 0
Ω
51-00050
B7
Junper, 0.35”, 0
Ω
50-00035
B9
Junper, 0.5”, 0
Ω
51-00050
B10
Junper, 0.5”, 0
Ω
51-00050
B11
Junper, 0.35”, 0
Ω
50-00035
B12
Junper, 0.35”, 0
Ω
50-00035
B13
Junper, 0.35”, 0
Ω
50-00035
B14
Junper, 0.35”, 0
Ω
50-00035
B15
Junper, 0.35”, 0
Ω
50-00035
B16
Junper, 0.8”, 0
Ω
44-18000
B17
Junper, 0.5”, 0
Ω
51-00050
B18
Junper, 0.35”, 0
Ω
50-00035
B19
Junper, 0.5”, 0
Ω
51-00050
B20
Junper, 0.35”, 0
Ω
50-00035
B22
Junper, 0.35”, 0
Ω
50-00035
B23
Junper, 0.8”, 0
Ω
44-18000
B24
Junper, 0.35”, 0
Ω
50-00035
B25
Junper, 0.35”, 0
Ω
50-00035
B26
Junper, 0.35”, 0
Ω
50-00035
B27
Junper, 0.35”, 0
Ω
50-00035
B28
Junper, 0.35”, 0
Ω
50-00035
B29
Junper, 0.5”, 0
Ω
51-00050
B30
Junper, 0.5”, 0
Ω
51-00050
B31
Junper, 0.5”, 0
Ω
51-00050
B32
Junper, 0.8”, 0
Ω
44-18000
B33
Junper, 0.8”, 0
Ω
44-18000
B34
Junper, 0.5”, 0
Ω
51-00050
B35
Junper, 0.35”, 0
Ω
50-00035
B36
Junper, 0.35”, 0
Ω
50-00035
B37
Junper, 0.35”, 0
Ω
50-00035
B50
Junper, 0.5”, 0
Ω
51-00050
C1
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C2
Capacitor, Poly, 0.01µF 100V, 10%
46-10312
C4
Capacitor, Poly, 0.001µF 100V, 10%
46-10212
C5
Capacitor, Poly, 0.033µF 100V, 10%
46-33312
C6
Capacitor, Ceramic, 120PF 500V, 10%
45-12152
C7
Capacitor, Poly, 0.01µF 100V, 10%
46-10312
C8
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C9
Capacitor, Mylar, 0.047µF 400V, 10%
41-47342
C10
Not Used
C11
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C12
Capacitor, Poly, 0.0033µF 100V, 10%
46-33212
C13
Capacitor, Ceramic, 250PF 500V, 5%
45-25152
C14
Capacitor, Ceramic, 560PF 500V, 10%
45-56152
C15
Not Used
C16
Capacitor, Ceramic, 0.0047µF 400V, 10%
41-47242
C17
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C18
Capacitor, Mylar, 0.047µF 400V, 10%
41-47342
C19
Capacitor, Ceramic, 120PF 500V, 10%
45-12152
C20
Capacitor, Poly, 0.022µF 100V, 10%
46-22312
C21
Capacitor, Poly, 0.0022µF 100V, 10%
46-22212
C22
Capacitor, Poly, 0.0022µF 100V, 10%
46-22212
C23
Not Used
C24
Not Used
C25
Capacitor, Poly, 0.047µF 100V, 10%
46-47312
C26
Capacitor, Ceramic, 82PF 500V, 5%
45-82052
C27
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C28
Capacitor, Mylar, 0.047µF 400V, 10%
41-47342
C29
Capacitor, Poly, 0.0022µF 100V, 10%
46-22212
C30
Capacitor, Electrolytic, 10µF 50V, 20%
47-10051
C31
Capacitor, Poly, 0.0022µF 100V, 10%
46-22212
C32
Not Used
C33
Capacitor, Poly, 0.001µF 100V, 10%
46-10212
C34
Capacitor, Ceramic, 56PF 500V, 5%
45-56052
C35
Capacitor, Poly, 0.047µF 100V, 10%
46-47312
C36
Capacitor, Mylar, 0.047µF 400V, 10%
41-47342
C37
Capacitor, Mylar, 0.047µF 400V, 10%
41-47342
Ref. #
Description
Carvin PN
C38
Capacitor, Electrolytic, 47µF 63V, 20%
47-47061
C39
Capacitor, Mylar, 0.047µF 630V, 10%
46-47362
C40
Capacitor, Electrolytic, 22µF 500V, 20%
42-20052
C41
Capacitor, Electrolytic, 22µF 500V, 20%
42-20052
C42
Capacitor, Electrolytic, 22µF 500V, 20%
42-20052
C43
Capacitor, Electrolytic, 22µF 500V, 20%
42-20052
C44
Capacitor, Electrolytic, 22µF 500V, 20%
42-20052
C45
Capacitor, Electrolytic, 2200uF 6.3V, 20%
47-22260
C46
Capacitor, Electrolytic, 2200uF 6.3V, 20%
47-22260
C47
Capacitor, Electrolytic, 2200uF 6.3V, 20%
47-22260
C48
Capacitor, Mylar, 0.047µF 630V, 10%
46-47362
C49
Not Used
C50
Capacitor, Poly, 0.0022µF 100V, 10%
46-22212
C70
Capacitor, Poly, 0.01µF 100V, 10%
46-10312
C71
Capacitor, Ceramic, 180PF 500V, 10%
45-18152
C72
Capacitor, Ceramic, 120PF 500V, 10%
45-12152
D1
Diode, 1N4745A 16V, 1W
60-47450
D2
Diode, 1N4745A 16V, 1W
60-47450
D3
Diode, 1N4745A 16V, 1W
60-47450
D4
Diode, 1N4745A 16V, 1W
60-47450
D5
Diode, 1N4003 200V, 1A
60-40030
D6
Diode, 1N4007A 1000V, 1A
60-10000
D7
Diode, 1N4007A 1000V, 1A
60-10000
D8
Diode, 1N4007A 1000V, 1A
60-10000
D9
Diode, 1N4007A 1000V, 1A
60-10000
D10
Diode, 1N4007A 1000V, 1A
60-10000
D11
Diode, 1N4007A 1000V, 1A
60-10000
D12
Diode, 1N4007A 1000V, 1A
60-10000
D13
Diode, 1N4007A 1000V, 1A
60-10000
D14
Diode, 1N4007A 1000V, 1A
60-10000
D15
Diode, 1N4007A 1000V, 1A
60-10000
D16
Diode, 1N4007A 1000V, 1A
60-10000
D20
Not Used
D21
Not Used
F1
Fuse Clips, (1 pair)
23-03529
Fuse 1AGC Fast
70-21010
F2
Fuse Clips, (1 pair)
23-03529
Fuse 10A Slow
70-22101
F3
Fuse Clips, (1 pair)
23-03529
Fuse 1AGC Fast
70-21010
G1
Ferrite Bead
15-27430
H1A
Cable 10” 2 conductor + Shield
05-00110
H2A
Conn. Header, 2 Pin Vert, SHS
23-11002
H2B
Conn. Header, 2 Pin Vert, SHS
23-11002
H3A
Conn. Header, 4 Pin Vert, SHS
23-11004
H3B
Conn. Header, 4 Pin Vert, SHS
23-11004
H5
Wire 10”, 18GA (Pair)
04-18010
H6
Wire 4”, 18GA (Pair)
04-18040
H7A
Conn. Header, 2 Pin Vert, SHS
23-11002
H7B
Conn. Header, 2 Pin Vert, SHS
23-11002
H8A
Conn. Header, 2 Pin Vert, SHS
23-11002
H8B
Conn. Header, 2 Pin Vert, SHS
23-11002
J1
Phone Jack, 1/4, 90° Rev Threaded Neck
21-01804
J2
Phone Jack, 1/4, 3 Pin Plastic, 24mm
21-06453
J3
Phone Jack, 1/4, 3 Pin Plastic, 24mm
21-06453
J4
Phone Jack, 1/4, 3 Pin Plastic, 24mm
21-06453
J5
Phone Jack, 1/4, 7 Pin Plastic Stereo, 24mm
21-06457
L1
Relay 3V PCB MNT, 5V DPDT
70-05303
L2
Relay 3V PCB MNT, 5V DPDT
70-05303
P1
Potentiometer, B100K, O Shaft, 16mm, RX250 90°
71-14052
P2
Potentiometer, B1MEG, O Shaft, 16mm, RX250 90°
71-14070
P3
Potentiometer, 25A25K, O Shaft, 16mm, RX250 90°
71-14050
P4
Potentiometer, B1MEG, O Shaft, 16mm, RX250 90°
71-14070
P5
Potentiometer, 5A500K, O Shaft, 16mm, RX250 90°
71-14060
P6
Potentiometer, B100K, O Shaft, 16mm, RX250 90°
71-14052
P7
Potentiometer, B1MEG, O Shaft, 16mm, RX250 90°
71-14070
P8
Potentiometer, 25A25K, O Shaft, 16mm, RX250 90°
71-14050
P9
Potentiometer, B100K, O Shaft, 16mm, RX250 90°
71-14052
P10
Potentiometer, B100K, O Shaft, 16mm, RX250 90°
71-14052
P11
Potentiometer, Trimmer, 20K PCB MTG
71-22012
P21
Potentiometer, 25A15K-C, O Shaft, 16mm, RX250 90° 71-14048
Ref. #
Description
Carvin PN
QC1
Spade Terminal, QC Vertical, 0.205
06-40045
QC2
Spade Terminal, QC Vertical, 0.205
06-40045
QC3
Spade Terminal, QC Vertical, 0.205
06-40045
QC4
Spade Terminal, QC Vertical, 0.205
06-40045
QC6A Spade Terminal, QC Vertical, 0.250
06-40050
QC6B Spade Terminal, QC Vertical, 0.250
06-40050
QC7
Spade Terminal, QC Vertical, 0.250
06-40050
QC8
Spade Terminal, QC Vertical, 0.250
06-40050
QC9
Spade Terminal, QC Vertical, 0.250
06-40050
QC13A Spade Terminal, QC Vertical, 0.250
06-40050
QC13B Spade Terminal, QC Vertical, 0.250
06-40050
QC14 Spade Terminal, QC Vertical, 0.250
06-40050
QC31 Spade Terminal, QC Vertical, 0.250
06-40050
QC32 Spade Terminal, QC Vertical, 0.250
06-40050
QC33 Spade Terminal, QC Vertical, 0.250
06-40050
QC35 Spade Terminal, QC Vertical, 0.250
06-40050
QC36 Spade Terminal, QC Vertical, 0.250
06-40050
QC37 Spade Terminal, QC Vertical, 0.250
06-40050
R1
Resistor, 100K, .35 Prep., 5% Carbon, 1/4W
50-10055
R2
Resistor, 1.5K, .35 Prep., 5% Carbon, 1/4W
50-15035
R3
Resistor, 220K, .35 Prep., 5% Carbon, 1/4W
50-22055
R4
Resistor, 150K, .35 Prep., 5% Carbon, 1/4W
50-15055
R5
Resistor, 100K, .35 Prep., 5% Carbon, 1/4W
50-10055
R6
Resistor, 1.5K, .35 Prep., 5% Carbon, 1/4W
50-15035
R7
Resistor, 220K, .35 Prep., 5% Carbon, 1/4W
50-22055
R8
Resistor, 1.5K, .35 Prep., 5% Carbon, 1/4W
50-15035
R9
Resistor, 220K, .35 Prep., 5% Carbon, 1/4W
50-22055
R10
Resistor, 4.7K, .35 Prep., 5% Carbon, 1/4W
50-47035
R11
Resistor, 220K, .35 Prep., 5% Carbon, 1/4W
50-22055
R12
Resistor, 47K, .35 Prep., 5% Carbon, 1/4W
50-47045
R13
Resistor, 1K, .35 Prep., 5% Carbon, 1/4W
50-10035
R14
Resistor, 220K, .35 Prep., 5% Carbon, 1/4W
50-22055
R15
Resistor, 47K, .35 Prep., 5% Carbon, 1/4W
50-47045
R16
Resistor, 10K, .35 Prep., 5% Carbon, 1/4W
50-10045
R17
Resistor, 22K, .35 Prep., 5% Carbon, 1/4W
50-22045
R18
Resistor, 100K, .35 Prep., 5% Carbon, 1/4W
50-10055
R19
Resistor, 220
Ω
, .35 Prep., 5% Carbon, 1/4W
50-22025
R20
Resistor, 2.2M, .35 Prep., 5% Carbon, 1/4W
50-22065
R21
Resistor, 47K, 0.8 Prep., 5% Carbon 1W
53-47045
R22
Resistor, 2.2M, .35 Prep., 5% Carbon, 1/4W
50-22065
R23
Resistor, 220K, .35 Prep., 5% Carbon, 1/4W
50-22055
R24
Resistor, 1.5K, .35 Prep., 5% Carbon, 1/4W
50-15035
R25
Resistor, 220K, .35 Prep., 5% Carbon, 1/4W
50-22055
R26
Resistor, 1M, .35 Prep., 5% Carbon, 1/4W
50-10065
R27
Resistor, 22K, .35 Prep., 5% Carbon, 1/4W
50-22045
R28
Resistor, 1.5K, .35 Prep., 5% Carbon, 1/4W
50-15035
R29
Resistor, 220K, .35 Prep., 5% Carbon, 1/4W
50-22055
R30
Resistor, 100K, .35 Prep., 5% Carbon, 1/4W
50-10055
R31
Resistor, 560
Ω
, .35 Prep., 5% Carbon, 1/4W
50-56025
R32
Resistor, 100K, .35 Prep., 5% Carbon, 1/4W
50-10055
R33
Resistor, 22K, .35 Prep., 5% Carbon, 1/4W
50-22045
R34
Resistor, 22K, .35 Prep., 5% Carbon, 1/4W
50-22045
R35
Resistor, 100K, .35 Prep., 5% Carbon, 1/4W
50-10055
R36
Resistor, 100K, .35 Prep., 5% Carbon, 1/4W
50-10055
R37
Resistor, 220K, .35 Prep., 5% Carbon, 1/4W
50-22055
R38
Resistor, 220K, .35 Prep., 5% Carbon, 1/4W
50-22055
R39
Resistor, 3.9K, .35 Prep., 5% Carbon, 1/4W
50-39035
R40
Resistor, 100K, .35 Prep., 5% Carbon, 1/4W
50-10055
R41
Resistor, 4.7K, .35 Prep., 5% Carbon, 1/4W
50-47035
R42
Resistor, 2.2K, .35 Prep., 5% Carbon, 1/4W
50-22035
R43
Resistor, 350
Ω
., SDOF, 10% Sand Bar,10W
56-35010
R44
Resistor, 100
Ω
, 0.35 Prep., 1% Metal, 1/4W
50-10021
R45
Resistor, 100
Ω
, 0.35 Prep., 1% Metal, 1/4W
50-10021
R46
Resistor, 10
Ω
, 0.5 Prep., 5% Carbon, 1/2W
52-10015
R49
Resistor, 100K, .35 Prep., 5% Carbon, 1/4W
50-10055
R50
Resistor, 1MEG, .35 Prep., 5% Carbon, 1/4W
50-10065
R57
Resistor, 4.7K, .35 Prep., 5% Carbon, 1/4W
50-47035
R60
Resistor, 56K, .35 Prep., 5% Carbon, 1/4W
50-56045
R61
Resistor, 56K, .35 Prep., 5% Carbon, 1/4W
50-56045
R62
Resistor, 350
Ω
, .35 Prep., 5% Carbon, 1/4W
50-35025
R63
Resistor, 350
Ω
, .35 Prep., 5% Carbon, 1/4W
50-35025
Ref. #
Description
Carvin PN
R64
Resistor, 56K, .35 Prep., 5% Carbon, 1/4W
50-56045
R65
Resistor, 56K, .35 Prep., 5% Carbon, 1/4W
50-56045
R66
Resistor, 350
Ω
, .35 Prep., 5% Carbon, 1/4W
50-35035
R67
Resistor, 350
Ω
, .35 Prep., 5% Carbon, 1/4W
50-35035
R70
Resistor, 2.2K, .35 Prep., 5% Carbon, 1/4W
50-22035
R71
Resistor, 10K, .35 Prep., 5% Carbon, 1/4W
50-10035
R72
Resistor, 470K, .35 Prep., 5% Carbon, 1/4W
50-47045
R73
Resistor, 22K, .35 Prep., 5% Carbon, 1/4W
50-22045
S1
Switch, DP3T Lift Tall Bat, PCB MTG
25-76286
Switch, Channel Select, SPST toggle, Chassis MTG
25-75801
Switch, Power, LG DPDT, Chassis MTG
25-31350
Switch, Stand-by, LG DPDT, Chassis MTG
25-31350
SPK1 Phone Jack, 1/4, 3 Pin Plastic, 24mm
21-06453
SPK2 Phone Jack, 1/4, 3 Pin Plastic, 24mm
21-06453
Vintage Tube 50, 120V Transformer, Chassis MTG
15-10640
Vintage Tube 50, Output Transformer, Chassis MTG
15-02066
V1
Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type Tube 12AX7A
65-00127
V2
Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type Tube 12AX7A
65-00127
V3
Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type Tube 12AX7A
65-00127
V4
Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type Tube 12AX7A
65-00127
V5
Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type Tube 12AX7A
65-00127
V6
Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type Tube EL84
65-00084
V7
Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type Tube EL84
65-00084
V8
Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type Tube EL84
65-00084
V9
Socket for 12AX7A/EL84 12VAC, 9 Pin, SIN/RUS
23-91632
Vacuum Tube, Type Tube EL84
65-00084
REPLACEMENT PARTS LIST
(for circuit cards)