ge-interlogix simon 3 Manual De Usuario
Simon Security System
23
Option 11: Exit Delay (Default = 060 sec)
Determines how much time the user has to leave the premises through a designated
delay door after arming the system. Beeps sound after arming the system to remind the
user to leave the armed premises.
delay door after arming the system. Beeps sound after arming the system to remind the
user to leave the armed premises.
If a delay door is opened after the Exit Delay expires, the Entry Delay begins. If the user
arms the system with No Delay and opens a delay door after the Exit Delay expires, an
alarm occurs.
arms the system with No Delay and opens a delay door after the Exit Delay expires, an
alarm occurs.
When turned on, the Exit Delay can be set from 005-254 seconds (045-254 if SIA Lim-
its Option 69 is on). All entries must be 3 digits. When turned off, the Exit Delay is set
to 005 seconds.
its Option 69 is on). All entries must be 3 digits. When turned off, the Exit Delay is set
to 005 seconds.
Note
For UL listed systems, the
exit delay must not exceed
60 seconds.
For UL listed systems, the
exit delay must not exceed
60 seconds.
¾
To set Exit Delay, press:
Add—Option #—11—3-digit delay time—DONE.
¾
To reset Exit Delay (return to default), press:
Delete—Option #—11—DONE.
Option 12: Phone Mod 1 (Default = 0)
Determines the primary phone number (Option 4) report content and reporting format.
Note
UL has only verified report-
ing compatibility with the
CS5000 Digital Alarm Com-
municator Receiver. For UL
listed systems, Phone Mod 1
must be set to 0 or 1.
UL has only verified report-
ing compatibility with the
CS5000 Digital Alarm Com-
municator Receiver. For UL
listed systems, Phone Mod 1
must be set to 0 or 1.
The following table describes the choices.
Alarms include: Fire, Intrusion, Emergency, Silent, and Alarm Cancels.
Non-alarms include: Latchkey, No Activity, Openings, Closings, Fail to Open, Fail to
Close, Force Armed, AC Power Failure, CPU Low Battery, and Trouble Restorals.
Close, Force Armed, AC Power Failure, CPU Low Battery, and Trouble Restorals.
¾
To set Phone Mod 1, press:
Add—Option #—12—0, 1, 2, or 3—DONE.
¾
To reset Phone Mod 1 (return to default), press:
Delete—Option #—12—DONE.
Option 13: Phone Mod 2 (Default = 00)
Determines the secondary phone number (Option 5) report content and reporting for-
mat. The following table describes the choices. All entries must be 2 digits.
mat. The following table describes the choices. All entries must be 2 digits.
Phone Mod 1
Setting #
Content
Format
0
All
SIA
1
All
Contact ID
2
Alarms only
SIA
3
Alarms only
Contact ID
Phone Mod 2
Setting #
Content
Format
00
All
SIA
01
All
Contact ID
02
Alarms only
SIA