husky-liners 3140 Manual De Usuario
3140.doc
Rev: 0
03/19/02
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place
of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your
new floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work
well. Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR FULL SIZE
CHEVROLET/GMC REGULAR CAB TRUCK
IF YOUR VEHICLE IS EQUIPPED WITH A MANUAL TRANSFER CASE SHIFTER, YOU WILL NEED
TO TRIM YOUR LINER AS SHOWN ABOVE. TRIM DOWN THE EDGES FORMED BY THE
RECESSED AREA ALONG THE WALL AND ACROSS THE SCRIBED LINE. YOUR LINER WILL NOW
FIT AROUND THE TRANSFER CASE SHIFTER HOUSING. A UTILITY KNIFE OR HEAVY SCISSORS
WORKS WELL FOR TRIMMING YOUR LINER.
TO TRIM YOUR LINER AS SHOWN ABOVE. TRIM DOWN THE EDGES FORMED BY THE
RECESSED AREA ALONG THE WALL AND ACROSS THE SCRIBED LINE. YOUR LINER WILL NOW
FIT AROUND THE TRANSFER CASE SHIFTER HOUSING. A UTILITY KNIFE OR HEAVY SCISSORS
WORKS WELL FOR TRIMMING YOUR LINER.
LEFT OR
DRIVER’S SIDE
RIGHT OR
PASSENGER’S SIDE