Panasonic PT-LB10VU Manual De Instrucciónes

Red

Illuminated

The projector is in standby mode and image projection
is possible by pressing the POWER button.

A picture is being projected.
The lamp is cooling down after the power is turned
off. (The cooling fan is operating.)
The projector is preparing for projection after the
power is turned on while the power indicator is
illuminated orange. (After a short period, a picture
will be projected.)

The projector is preparing for projection after the
power is turned on while the power indicator is
illuminated red. (After a short period, a picture will be
projected.)

Flashing

Illuminated

Illuminated

Flashing

Green

Orange

You can disconnect the power cord during projection or immediately after
use and move the projector. The cooling fan will operate by the internal
power supply to cool down the lamp.
B When this function is used, it may take more time for the lamp to turn back

on again compared to when the lamp cools down with the power cord
connected.

B Do not put the projector in a bag while the cooling fan is operating.

If not using the projector for an extended period of time, disconnect the
power cord plug from the wall outlet.
B If dust builds up on the power cord plug, the resulting humidity may

damage the insulation, which could result in fire.

B This projector continues to draw approximately 6 W of power even when

the power is turned off.