Panasonic WHUD16CE5A Guía De Operación

Examples of 

abnormality/

failure

•  The RCCB switches off by itself.

•  Burning smell, abnormal noise or vibration 

sound is observed when the unit is in use.

•  Hot water keeps on coming off the unit.

/

/

 

Do not wash the indoor unit with water, 

benzene, thinner or scouring powder.
Do not install the unit close to any combustible 

equipment or at bathroom. Otherwise, it may 

cause electric shock or fi re.
Do not touch the water discharge pipe at the 

indoor unit during operation.
Do not place anything on top or beneath of the 

unit.
Do not sit or step on the unit, you 

may fall down accidentally.

Do not touch the sharp aluminium fi n, 

sharp parts may cause injury.

Ensure drainage pipe is connected properly. 

Otherwise, leakage may occur.
Check the installation rack periodically to make 

sure that it is not damaged. After long periods 

of use, the strength of the installation rack may 

have deteriorated.

Do not let the control panel get wet. Otherwise, 

it may cause electric shock or fi re.
Do not press the buttons on the control panel 

with hard, pointed objects. Otherwise, it may 

damage the unit.
Do not wash the control panel with water, 

benzene, thinner or scouring powder.
Do not inspect or service the control panel by 

 not inspect or service the control panel by 

yourself. Please consult authorized dealer.

yourself. Please consult authorized dealer.

Otherwise, it may cause injury if mishandling.

 

Do not use modifi ed cord, 

joint cord, extension cord or 

unspecifi ed cord to prevent 

overheating and fi re. 
Do not share the same power outlet with other 

equipment to prevent overheating and fi re.
Do not operate with wet hands to prevent electric 

shock.
If the supply cord is damage, it must be replaced 

by the manufacturer, its service agent or similarly 

qualifi ed persons in order to avoid a hazard.
This unit is equipped with Residue Current Circuit 

Breaker (RCCB). It is strongly recommended to 

check the operation of the RCCB after installation 

and periodically after servicing or maintenance by 

authorized dealer to ensure it is in good working 

order. Otherwise, it may cause electrical shock or 

fi re in case of malfunction.
It is strongly recommended to install Residual 

Current Device (RCD) on-site to prevent electric 

shock or fi re.
It is recommended to wear gloves during servicing 

or maintenance in order to avoid hazard.
This equipment must be earthed to prevent 

electrical shock or fi re.

Prevent electric shock by switching off the power 

supply when:

- Before cleaning or servicing.

- Extended non-use.
This appliance is for multiple uses. All power 

supply circuits must be turn off before access to 

any of the terminals in the indoor unit, to avoid 

electrical shock, burn or fatal injury.