Panasonic ERSB60 Guía De Operación
14
English
►
Charging stand
Use the cleaning brush to clean hair trimmings and dust in the
charging plug or in the hole on the bottom surface.
Lubrication
• Apply the oil to the blade before and after each use.
1
Remove the blade�
(See this page�)
2
Apply a drop of the oil to each
indicated point�
3
Attach the blade to the main
body, turn on the power and
allow to run for
approximately 5 seconds�
Removing and mounting the blade
►
Removing the blade
Hold the main body with the switch
facing upward and push the blade with
your thumb while catching the blade in
your other hand.
►
Mounting the blade
Fit the mounting hook (B) into the blade mounting (A) on the
main body and then push in until you hear a click.
ER-SB60_ME.indb 14
7/19/2017 9:35:15 AM